ELE148312XG!001ENGB- -  -  N- ADEM V (A5E2v1) Electronic Control Module -N- S- S- -20/12/2013- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 889.405Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE148312XG/001- N-19/dic/2018889405
 
Form
   Prodotti Elettrici(TO)
ELE148312XG/001
Certification N. ELE148312XG/001 - (ENG)
Certificate date 20/12/2013
Type Impianti di Automazione
Product Sistema di comando, sicurezza e monitoraggio per motori Diesel

Model or Denomin.
Items		 ADEM V (A5E2v1) Electronic Control Module
Applicant CATERPILLAR INC. LAFAYETTE ENGINE CENTER
Place of requester 3701 STATE ROAD 26 EAST LAFAYETTE, IN  % U.S.A.
Tel. N.,Fax, Email 1-765-4485316, 1-765-448-5557/2239, ---
Standards Rules for the classification of ships.- Part C - Machinery, systems and fire protection. - Ch.3, Sect. 6, Table 1.
Expire date 19/12/2018
Head Office Hamburg
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE148312XG/001
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Control, safety and monitoring system for Diesel engines
Type ADEM V (A5E2v1) Electronic Control Module
Applicant CATERPILLAR INC. LAFAYETTE ENGINE CENTER
3701 STATE ROAD 26 EAST LAFAYETTE, IN
U.S.A.
Reference standards Rules for the classification of ships.- Part C - Machinery, systems and fire protection. - Ch.3, Sect. 6, Table 1.
  

 
 
   .   This Certificate is valid until December 19, 2018
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE148312XG/001
Enclosure - Page 1 of 1
ADEM V (A5E2v1) Electronic Control Module

ADEM V (A5E2v2) Electronic Engine Control Module
Parts: ADEM V (A5E2v1) Control Module Part No. 345 3381
ECM Software Boot Part No. 351 3155
ECM Software GP-Electronic Part No. 352 8498


Documents:
  • Functional description
  • Block diagram
  • List of engineering prints
  • Engineering prints (Drawings)
  • MCS approval certificates
  • Marine cable approvals techn. Inform. 2/2002
  • Functional failure analysis
  • Alarm and Setpoints
  • ECM software quality procedure, S646
  • RINA Type Approval Certificate ELE148312XG/002


Test Reports:
  • ADEM V Environmental & EMC Test Results


Certificate Retention:
All changes in software and hardware are to be recorded as long as the system is in use on board.
The records of all changes are to be forwarded to RINA for evaluation and approval.
Major changes in the software / firmware are to be approved before being installed on the programmed systems.

Hamburg December 20, 2013
**** NOTICE: This is NOT an official certificate ****